Stiff Breeze


First came the Breeze – a monitor that set a new benchmark for performance at it’s price.  The next step was obvious, take the foundation of the Breeze and give the listener more!

The Stiff Breeze definitely gives the listener more.  The 2nd woofer and larger cabinet result in increased sensitivity, increased power handling, more dynamics, improved midrange resolution and transparency, and a larger and more powerful presentation. Now in Revision 2, the Stiff Breeze offers a larger Transmission Line cabinet. This evolution of the design results in added low frequency impact and extension, but even more noticeable are the benefits in midrange articulation and reduced congestion at higher volumes.

Like the Breeze, the Stiff Breeze employs time alignment between drivers.  Combined with the extended bandwidth woofers and tweeter, everything simply snaps into place in an ideal way.  The crossover is only 4 total components, yet still retains a balanced frequency response that deviates from flat by only +/- 2db.

The Breeze is offered in 2 standard finishes:  matte finish maple, and piano gloss black.
As with all of our speakers we do offer custom veneering upon request and at extra charge.

Stiff Breeze pricing starts at $2495/pair

Stiff Breeze Center Channel pricing starts at $1395/each

Stiff Breeze Photo Gallery

  • Drivers Used RAAL 70-10D Tweeter
    2x Wavecor Glass-Fiber cone, Symmetric Motor Drive 6″ Woofer
    Cabinet Tuning Rear Ported, 43hz tuning frequency
    Freq Response 42 – 39,000hz +/-3db, 46 – 36,000 hz +/- 1.5db
    Nominal Impedance 4 ohms
    Sensitivity 91 db
    Recommended Power 25 – 200 watts via Tube Amp
    50 – 200 watts via Solid State Amp
    Weight and Dimensions 47 Pounds
    20″ Height x 14″ Deep x 8″ Max Width
    Crossover Details Time aligned, shallow slope network with Crossover point of 3100hz
  • RAAL ribbon tweeter element Custom
    Glass Fiber Symmetric Motor Drive 6″ midrange driver
    Time aligned baffle stepping with multi-material laminated construction
    Vapor Audio’s proprietary Acoustic Inversion Layer dampening treatment to reduce cabinet wall resonance by over 20db.

    Standard Crossover Features:
    Mundorf EVO capacitors
    Large Gauge air core inductors
    Kimber Cable internal Wiring
    All point-to-point hand soldered with Cardas Silver Solder

    Standard Finishes:
    Piano Finish Black
    Matte Finish Cherry
    Matte Finish Maple

  • Below is a listing of some more popular upgrades, many others are available.
    Crossover components, wiring, and binding posts can all be chosen by the customer.
    Contact us for details and pricing.

    Finish Upgrades:
    Upgrade from standard finish to custom veneer – $300 (starting price, can vary)
    Hand Rubbed High Gloss Piano finish – $500

    Custom Height matching stands – $500

    Crossover Upgrade packages:
    Mundorf EVO Silver/Gold/Oil capacitors – $250 (LIVE)
    Jensen Copper/Foil capacitors – $400 (BALANCE) *requires custom stand upgrade
    Dueland CAST capacitors – $1500 (PERFECTION) *requires custom stand upgrade

    - Please remember this is only a starting point for cap options. We have used many others not listed here and can offer insights on the best way to reach the sound you want, in the budget required. Inquire for more info

    Binding Post Upgrades:
    Upgrade to WBT 0703 – $60
    - bi-wire with WBT 0703 - $120
    Upgrade to WBT 0710 Gold – $100
    - bi-wire with WBT 0710 - $200
    Upgrade to WBT 0710 Silver – $200
    - bi-wire with WBT 0710 - $400

    Internal Wiring Upgrades:
    Antipodes Reference Silver/Gold Litz wire throughout – $800 (price can vary)

    Many options available, contact us for pricing and details